The most important technical data

ST - standard equipment

Case

• manufactured completely in special steel 1.4301.
• dimensions: 382x262x152mm (WxHxD).

Protective system according to DIN/VDE 0470

• IP 68

Display

• back-lit LCD display, divided into the display areas for the weight values, digit height approx. 18mm with status data and data, which is specific for the scales or is concerning calibration; 21-digit display line e.g. for operator guidance or as a display for additional characters or as a functional display; 5x7 dot matrix, character height approx. 12mm.

Keyboard

• 27 labelled foil keys with a mechanical pressure point and acoustical entry confirmation
• 7 functional keys out of 27 keys can be allocated by the customer..

ADC

• an ADC module to be plugged ino the display/ CPU board for the connection of a load receptor with weighing cells, which use wire strain gauges. Impedance (min.) 56 Ohm.

Auxiliary power

• standard: 120/230V connection.
• AC via the mains with shockproof plug.
• optional: Battery operation with electronic total discharge protection or 24V, AC/DC mains operation.

ST - optional equipment

Additional ADC

• second and third ADC for the connection of another load receptor with weighing cells, which use wire strain gauges.
• selection via a functional key.

Storage, which can be calibrated (ES)

• an additional board with its own microprocessor, which is built into in the case of the evaluating unit.
• the storage of the weighing results takes place in a flash EPROM with a storage capacity of 4 MB¹ or 8 MB.
• for checking purposes it is possible to display the stored data on the display.
• the output of the data is possible via a serial interface.

Infrared interface

• asynchronous serial interface for the securing of data and servicing with an infrared adapter via a laptop.

Static I/O

• 8 inputs and 8 outputs for controls in the environment of the scales.

Analogue I/O

• analogue output 0/4 - 20 mA
• analogue input 0/4 - 20 mA

Serial interface

• 2 asynchronous serial interfaces V 24/RS 232 C without control or message wires (plugged into the display/CPU board) or optional RS 422/RS 485, TTY.

ST - optional functions / software

Software modules

• counting, plus/minus tolerance check (according to weight), plus/minus tolerance check (according to %), plus/minus tolerance check (according to number of pieces), single-component dosing (filling), single-component dosing with filling column control, single-component dosing "big bag", dynamic flow weighing.

Software modules for the connection to external equipment

• EDP connection (dialogue), registring/ printer, Profibus FDL report level 2, Profibus DP max. 12 Mbit, Modbus, scanner/ scanning pen, control package PIO 8 IN / 8 OUT, SIEMENS connection procedure 3964R, Config-Tool (PC software)

Do you have any questions regarding this product? - Please contact us.

¹1MB = approx. 100,000 weighings (back to the top)

Alterations reserved in the process of improving the products.